Solenoid Valve

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

• Automatic solenoid valves may be used to control instrumentsir, low pressure pases, gravity feed & other application where maximum size & low cost ere decisiva.

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Optimise power consumption 
• IP 65 enclosures
• Compact & Lightweight
• Longer Operation Life

Product Details:

• Cast aluminum construction
• Internal pilot operated
• Arielle type diaphragm valves
• Polyurethene diaphragm gives longer life.

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Cast aluminum construction
• Internal pilot operated
• Arielle type diaphragm valves
• Polyurethene diaphragm gives longer life.

Product Details:

We are offering 3/2 Way Poppet Type Solenoid valve to our clients.

Features:

• Aluminimum Body Construction
• Internal Pilot Operated
• Safe & Reliable Operation
• Fast Operation
• Manual Override provided
• Normally open / Normally closed
• Spring return pilot
• Full bore orifice

Product Details:

• High pressure range upto 70 bar an more available
• High temprature seals viton and EPDM 
• Cast Aluminum constructed
• Easy to service

Product Details:

• Internal Pilot Operated
• Minimum Operating Pressure 2 kg/cm2
• Rugged Aluminium Construction
• Spool Operated
• Manual Over Ride Provided
• Single or Double Solenoid
• Sub-Base Mounted
• Longer Operational Life
• Easy to Service
• Largly used on wagons

Product Details:

• Forged brass construction
• Internal piol operated
• Minimum operating pressure 0.5 kg/cm2
• Niltrile polyurihane - virton olephnegm depending upon application
• Water light solenoid enclosures
• Built to withstand millions of trouble tree cycles

• Used on a broad variety of installation such as instrumentation, laundry equipment, spraying equipment, dental equipment, health club etc. providing single automatic control of the flow of media in a pipe line.

Product Details:

• Manual low cost valve.
• 2 position, 3 positiib.
• Hand laver/ Foot operated/ Push Pull/ Roller Type Roller Lever
• Type/ Push Button.
• Sizes From 1/4" to1/2".
• Offers million of trouble free cycles.

Additional Information:

• Item Code: Series200-Midget

Product Details:

• No contact of media to internal equipment
• Tight Shutoff
• Work from zero pressure
• Low on maintenance
• Compact size

• NCM valve are typically used where corrosive media is to be controlled. These simple ON OFF valves do oil allow the flowing media to come in contact with the plunque & Spring thus avoiding any damage or corrosive to the components.

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Tight Shutoff
• No Minimum Pressure Required
• Maximum working Pressure 8 kg/cm2
• Only Two Moving Parts
• Vertically Mounted

• Variety of application such as air, gases, liquids & corrosive media. Can be used upto 8 kg/cm2 pressure giving Optimum Flow.

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Internal Pilot Operated
• Aluminum construction
• Sub-hose mounted / manifold mounted
• Easy to service
• Manual Override Provided
• Longer Operation Life

Product Details:

• Vibration Resistance
• NBR or Viton Seals - For high temp
• Optimise power consumption - up to 11W
• Manual Override Provided
• IP 65 enclosures
• Compact & Lightweight
• Longer Operation Life

Product Details:

• Cast aluminum construction
• Internal pilot operated
• Arielle type diaphragm valves
• Polyurethene diaphragm gives longer life.

Product Details:

• Internally Pilot Operated.
• Operation pressure 1.4. 10KG/cm2.
• Aluminum construction.
• Subhose mounted.
• Longer operation life.
• Modes of operation.

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction

Product Details:

• Tight shut-off
• No Minimum Pressure required.
• Low  Cost - Minimum size.
• Only one moving part eliminates maintainance problem
• To control instrument air, low  pressure gasas,
• gravly feed &  other applications.
• Can be installed in any direction

• Type- Normally  close & Normally Open
• Orifice- 1 mm to 2.5 mm
• Working Pressures - 0 - 10 bar
• Coil- Class A Standard Optional Class F (150 Deg) / Class (180 Deg)
• Wattage- 4.5 to 11 W
• Enclosure- IP 55 / IP 65 / IP 66 / IP 67
• Size- 1/8" & 1/4"
• Threads- BSP / NPT

• Body- Forged Brass & stainless Steel 304 / SS 316
• Housing- Brass Stainless Steel
• Plunger- SS 430 F
• Spring- SS
• Seals- Buna- N Standard (For High Temperature Viton / Teflon)

• Automatic Solenoid valves may be used to Contrrol Instrument air. Low pressure gases gravity feed and other applications where Minimum size & Low coal  are Decisive Factors. Typical installations of operating small cylinders / Boiler applications Providing automatic solutions to all manual process.

Product Details:

• Tight shut-off
• No Minimum Pressure required.
• Low  Cost - Minimum size.
• Only one moving part eliminates maintainance problem
• To control instrument air, low  pressure gasas, gravly feed &  other applications.
• Can be installed in any direction

• Type- Normally  close & Normally Open
• Coil- Class A Standard Optional Class F (150 Deg) / Class (180 Deg)
• Enclosure- IP 55 / IP 65 / IP 66 / IP 67

• Body- Forged Brass & stainless Steel 304 / SS 316
• Housing- Brass Stainless Steel
• Plunger- SS 430 F
• Spring- SS
• Seals- Buna - N Standard (For High Temperature Viton / Teflon)

• Automatic Solenoid valves may be used to Contrrol Instrument air. Low pressure gases gravity feed and other applications where Minimum size & Low coal  are Decisive Factors. Typical installations of operating small cylinders / Boiler applications Providing automatic solutions to all manual process.

Product Details:

• Fast response, increased reliability & simplified maintenance
• Cast Aluminum constructed
• Sub-base mounted
• Easy to service
• Internal Pilot Operated, Spool Operated
• Manual Override Provided
• Hi-Flow Capacity
• Full Bore Orifice

Product Details:

• Cast aluminum construction
• Internal pilot operated
• Arielle type diaphragm valves
• Polyurethene diaphragm gives longer life.

• Used on dust collector systems provides full opening & closing, giving necessary shock waves to ftee the dust from filter bags.

Product Details:

• Tight shut-off
• No Minimum Pressure required.
• Low Cost - Minimum size.
• Only one moving part eliminates maintainance problem
• To control instrument air, low pressure gasas,
• gravly feed & other applications.
• Can be installed in any direction

• Type- Normally close & Normally Open
• Coil- Class A Standard Optional Class F (150 Deg) / Class (180 Deg)
• Enclosure- IP 55 / IP 65 / IP 66 / IP 67
• Size- 1/8" & 1/4"
• Threads- BSP / NPT

• Body- Forged Brass & stainless Steel 304 / SS 316
• Housing- Brass Stainless Steel
• Plunger- SS 430 F
• Spring- SS
• Seals- Buna- N Standard (For High Temperature Viton / Teflon)

• Automatic Solenoid valves may be used to Contrrol Instrument air. Low pressure gases gravity feed and other applications where Minimum size & Low coal are Decisive Factors. Typical installations of operating small cylinders / Boiler applications Providing automatic solutions to all manual process.

Product Details:

• Tight shut-off
• No Minimum Pressure required.
• Low  Cost - Minimum size.
• Only one moving part eliminates maintainance problem
• To control instrument air, low  pressure gasas,
• Gravly feed &  other applications.
• Can be installed in any direction

• Type- Normally  close & Normally Open
• Orifice- 1 mm to 2.5 mm
• Working Pressures - 0 - 10 bar
• Coil- Class A Standard Optional Class F (150 Deg) / Class (180 Deg)
• Enclosure- IP 55 / IP 65 / IP 66 / IP 67

• Body- Forged Brass & stainless Steel 304 / SS 316
• Housing- Brass Stainless Steel
• Plunger- SS 430 F
• Spring- SS
• Seals- Buna - N Standard (For High Temperature Viton / Teflon)

• Automatic Solenoid valves may be used to Contrrol Instrument air. Low pressure gases gravity feed and other applications where Minimum size & Low coal  are Decisive Factors. Typical installations of operating small cylinders / Boiler applications Providing automatic solutions to all manual process.

Product Details:

• Forged brass construction
• Internal piol operated
• Minimum operating pressure 0.5 kg/cm2
• Niltrile polyurihane - virton olephnegm depending upon application
• Water light solenoid enclosures
• Built to withstand millions of trouble tree cycles

Product Details:

• Polyurethane Diaphragm
• Diaphragm life of over one million cycles
• Available from 12 VAC/DC to 230 VAC
• Large Orifice gives high volume discharge

• Used on Dust Collector Systems Provides full opening  & closing giving necessary shock waves to free the dust from filter bags

Product Details:

• Tight shut off
• No minimum pressure required
• Low cost-minimum size
• Only one moving part eliminates maintenance problem
• To control instrument air,low pressure gasas, gravity teed & other applications.
• Can be mounded in any direction